Service manual
AXIS H-EMC/ AXIS H-EMC + W
Implement ECU software update as of
SW 3.00.00
Rauch Landmaschinenfabrik GmbH
+49 (0)7221/985-250 [email protected]
Page
2
of
16
Update SW
3.00.00
27/08/14
Chapter 411
3. Preparation
•
Implement ECU connected to ISO terminal, power supply established
Note down the settings and calibration data
(example settings)
(
= particularly important
calibration and settings data)
Fertiliser settings
Machine configuration
Under
Fertilizer chart
, the
complete spreading tables for
the different fertilisers can be
found.
As of SW 2.05.00, the spreading
tables are maintained, however,
they must be checked after the
update
