AXIS-H EMC/AXIS-H EMC+W
Retrofitting the LS relief at the block
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: [email protected]
Page
1
of
1
04.11.2014
Chapter 520
AXIS H-EMC in LS operation =>
Speed variations of the spreading discs
For some tractors, a missing and/or insufficient LS relief in the tractor’s hydraulic system
may lead to speed variations of the spreading discs.
Solution: For hydraulic blocks delivered
as of calendar week 48/2011
, a relief can be
created in the hydraulics block by means of screw-in blinds. The new blocks can be visibly
identified by means of the additional closure screw
(labelling)
.
Upon the release of the closure screw, the M6 sealing plug can be replaced by a blind.
Start with a 0.3 mm blind.
If the improvement is insufficient, test the further sizes 0.5 / 0.6 / 0.7.
The blinds are available as spare parts set under order no.
2057677.
