TECHNICAL INFORMATION - SERVICE
Page 1 of 4
2014-09-03_TI_AXIS-HEMC_Freigabe-Software-V3-01-00-EN(UK)
PRODUCT LINE
Electronics
DATE
03/09/2014
TOPIC
AXIS-H EMC Release of Software Version 3.01.00
The AXIS-H EMC software version 2.08.00 has been further developed to meet new practical
requirements.
Operation via joystick, easy switching between boundary and border spreading, direct input of
the application rate on the operating screen and further functions have been implemented.
The new software version 3.01.00 is now released after successful testing and certification by
the AEF.
www.aef-isobus-database.org
The software version 3.01.00 is available for download in the RAUCH portal for business
partners.
Joystick operation
Operation by means of the AUX N joystick MFG 4 by
WTK Elektronik is released.
The joystick is also available from RAUCH
(order no. 2057592).
With software version 3.01.00, the file [Aux2file.dat]
with a default key assignment for WTK AUX N
joysticks (as of version 6.11) is installed.
The key assignment can also be customised and
saved.
Figure 1
For other AUX N joysticks, the assignment has to be
defined and saved once.
Figures 1 – 3 illustrate the default assignment of the
three levels.
Figure 2
•
AUX O (old) is not supported!
•
The ISOBUS terminal used must also support
AUX N
•
For John Deere GS 2630 terminals, at least
software version 3.25.1152 needs to be
installed.
Under version 3.22.1095 or older, occasional log
out of the WTK joystick occurs.
