AXIS-H EMC/AXIS-H EMC+W
Check: Pressure sensor
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: [email protected]
Page
1
of
3
29.10.2014
Chapter 670
Effects of defective pressure sensors:
Return sensor:
-
Flow factor increase or decrease on both sides
-
Idle measurement does not start
Sensor left/right
-
Flow factor increase or decrease on one side
-
Idle measurement does not start on one side
(Figures refer to AXIS-H 30.1 EMC with CCI terminal)
As the pressure in bar is displayed with a delay, the AD values of the pressure
sensors are applied for testing. The pressure display can also be used.
