background image

11

TU_D_Oskar°-10-2021-04-wi - Irrtümer und Änderungen aller Angaben, Bilder und Zeichnungen bleiben vorbehalten. 

Die Einhaltung der allgemein gültigen und anerkannten Regeln der Technik und evtl. örtlicher Vorschriften sind unbedingt einzuhalten! 

ACHTUNG! Installation, Verdrahtung nur durch autorisiertes Fachpersonal. 

To avoid injuries of any kind, the general accident prevention regulations must be observed 

under all circumstances and personal protective equipment must be used accordingly.

Safe installation

• 

To ensure safe installation, the responsible installer must ensure that: 

 

the personnel have the necessary qualifications  

and receive the necessary training; 

the personnel have read and understood the operating instructions; 

the personnel have access to the operating instructions at all times; 

the local accident prevention and environmental regulations are implemented and 

complied with; 

the personnel are instructed by the responsible supervisor and unauthorised persons 

are kept away from the ratiotherm system;

TECHNICAL CHANGES

Safety devices must not be put out of operation.  

 

Only original spare parts and original accessories from the manufacturer are to be used. 

UVV, INSTALLATION, CHANGES

NOTES ON SAFETY

Summary of Contents for Oskar-10

































































Reviews: