58
TU_D_Oskar°-10-2021-04-wi - Irrtümer und Änderungen aller Angaben, Bilder und Zeichnungen bleiben vorbehalten.
Die Einhaltung der allgemein gültigen und anerkannten Regeln der Technik und evtl. örtlicher Vorschriften sind unbedingt einzuhalten!
ACHTUNG! Installation, Verdrahtung nur durch autorisiertes Fachpersonal.
1430
1560
1
Circulating pump Length 180 Primary circuit
2
Circulation pump Length 180 Secondary circuit
3
Flow rate adjustment valve
4
Plate heat exchanger
5
Manual ventilation (secondary)
6
Compression fitting 28 x 1.5
7
DN 25 1
½
“ AG
8
Flush and fill fitting
9
Immersion sleeve for WT sensor (S9)
10
Gravity brake with manual setting
11
Ball valve with integrated thermometer
12
Immersion sleeve for solar return sensor (S12)
Attach the pipes of the solar circuit to the upper connections using compression fittings.
When using soft and thin-walled pipes, use support sleeves for additional stabilisation of the pipe.
support sleeves should be used to additionally stabilise the pipe.
The pipe ends must be cut off at right angles and be free of burrs.
Push the pipe in as far as it will go, tighten the compression fittings using a suitable tool (open-end wrench or
similar).
tighten the compression fittings using a suitable tool (open-end spanner or similar).
When tightening, counterhold with a suitable tool (not pump/pipe wrench).
SOLAR COMPACT STATION
SOLARTHERMIE
Summary of Contents for Oskar-10
Page 1: ...Technical file Oskar 10...
