49
TU_D_Oskar°-10-2021-04-wi - Irrtümer und Änderungen aller Angaben, Bilder und Zeichnungen bleiben vorbehalten.
Die Einhaltung der allgemein gültigen und anerkannten Regeln der Technik und evtl. örtlicher Vorschriften sind unbedingt einzuhalten!
ACHTUNG! Installation, Verdrahtung nur durch autorisiertes Fachpersonal.
3.3 Mounting instructions for sensor adapter set
A mounting set is included for the WM meter with temperatu
-
re sensor 5.2 x 45 mm that we supply. With this set, the sensor
can be mounted directly immersed in a chock or ball valve, for
example. Installation instructions (see picture): Insert the O-
ring into the installation point using the enclosed installation
aid/pin. Place the two halves of the plastic screw connection
around the 3 grooves of the sensor, press them together and
screw them into the installation point as far as they will go
(professional, tightening torque 3 - 5 Nm).
Red-nipple
1 1/2“AG x 1“IG
L=25mm
Red-nipple
1 1/2“AG x 1“IG
L=35mm
Will no
WMZ from
ratiotherm
is used,
there is also no
fitting for
the tempera-
ture
sensor is inclu-
ded!
This is from
the
WMZ Manu-
fact.
on site!
procured!
1/2“
IG
OPTIONAL RETROFITTING TWK-S 70 / 90 / 100 + CASCADES
HEAT METER
Summary of Contents for Oskar-10
Page 1: ...Technical file Oskar 10...
