ratiotherm Oskar-10, Manual

Page: 14 / 64

14
TU_D_Oskar°-10-2021-04-wi - Irrtümer und Änderungen aller Angaben, Bilder und Zeichnungen bleiben vorbehalten.
Die Einhaltung der allgemein gültigen und anerkannten Regeln der Technik und evtl. örtlicher Vorschriften sind unbedingt einzuhalten!
ACHTUNG! Installation, Verdrahtung nur durch autorisiertes Fachpersonal.
TECHNICAL DATA
Type: Oskar-WPS--10/1,5/... 750 1.000 1.300 2.000 3.000 4.000 Liter
actual volume approx: 720 920 1.340 2.010 3.000 4.000 l
Volume flow: 1.500 1.500 1.500 1.500 1.500 1.500 l/h
Total height without insulation:
1.730-1.770 2.110-2.150 1.990-2.030 2.100 1.940 2.440
mm
Total height with insulation: 1.890 2.270 2.150 2.220 2.080 2.560 mm
Diameter without insulation: 790 790 1.000 1.200 1.600 1.600 mm
Diameter with insulation: 990 990 1.200 1.440 1.840 1.840 mm
Length with connections front and rear 1.040 1.040 1.240 1.500 1.900 1.900 mm
Length with add-on manifold 1 1.387 1.387 1.587 1.847 2.247 2.247 mm
Length with add-on manifold 2 1.420 1.420 1.620 1.880 2.280 2.280 mm
Loading connections on the left/right side
Wide
1.015 1.015 1.220 1.470 1.870 1.870 mm
Length with add-on manifold 1 (347mm) 1.362 1.362 1.567 1.817 2.217 2.217 mm
Length with add-on manifold 2 (380mm) 1.395 1.395 1.600 1.850 2.250 2.250 mm
Weight without insulation approx: 140 155 220 285 470 550 kg
Tilting dimension max: 1.850 2.220 2.080 2.260 2.200 2.650 mm
Dimensional tolerances ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 mm
Operating overpressure max: 3 3 3 3 3 3 bar
Operating temperature max: 95 95 95 95 95 95 °C
Pressure loss Oskar°: 20 20 20 20 20 20 mbar
Pressure loss Oskar°: 0,2 0,2 0,2 0,2 0,2 0,2 mWS
Standby heat loss DIN: 1,92 2,27 2,71 3,13 3,88 4,77 kWh/d
Air vent on top:
½
“
½
“
½
“
¾
“
¾
“
¾
“ RIG
Material container: St 37-2 / S235JR / P265GH
Paintwork: black rust protection paint on the outside / raw on the inside
Position heights of the standard SE connections from the lower edge of the storage feet:
Nr. 1 Heat generator (HT) flow 1.598 1.911 1.767 1.920 1.727 2.106 mm
Nr. 2 Heat generator(LT) return 328 361 497 370 452 556 mm
Nr. 3 WHeat generator (LT) return
1.138 1.461 1.307 1.470 1.267 1.656
mm
Nr. 4 Consumer (LT) return 473 506 642 515 602 701 mm
Nr. 5 Consumer (HT) flow
1.668 2.016 1.837 2.025 1.798 2.211
mm
Nr. 6 Consumer (LT) return 738 771 907 780 867 966 mm
Nr. 7 Consumer (HT/LT) flow
1.138 1.461 1.307 1.470 1.267 1.646
mm
Nr. 8 Solar return 160 160 180 200 180 200 mm
Nr. 9 Solar flow
1.218 1.531 1.387 1.540 1.347 1.726
mm
Nr. 10 Heat generator (LT) flow 1.288 1.611 1.457 1.620 1.417 1.806 mm
Positioning of sensors S3 and S11 in the vertical immersion sleeve:
S3
Heating system HT / LT 800 800 800 800 800 900
mm
S11 Reference sensor solar + HG2 1.500 1.880 1.700 1.700 1.500 2.010 mm
OSKAR-WPS-10/1,5/...