Advanced System Use & Maintenance
User Manual
ApplianceStor
50
Rev. 1, November 2011
57
These jumpers allow you to enable or disable the onboard Intel® 82574L Gigabit LAN controllers.
Set to pins 1-2 to activate the Gigabit LAN feature.
Figure 78- LAN controller
RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when you create disk arrays.
Place the jumper caps over pins 1-2 if you want to use the LSI Logic Embedded SATA RAID Setup
Utility (default); otherwise, place the jumper caps to pins 2-3 to use the Intel® Rapid Storage
Technology.
Figure 79- RAID configuration utility
Force BIOS recovery setting (3-pin RECOVERY1)
This jumper allows you to quickly update or recover the BIOS settings when it becomes corrupted.
To update the BIOS:
1.
Prepare a USB flash disk that contains the original or latest BIOS for the motherboard
(XXXXXX.ROM) and the BUPDATER.EXE utility.
2.
Set the jumper to pins 2-3.
3.
Insert the USB flash and turn on the system to update the BIOS.
4.
Shut down the system.
5.
Set the jumper back to pins 1-2.
6.
Turn on the system.
