Rasilient ApplianceStor 50 User Manual Download Page 113

Page: 113 / 116

Advanced System Use & Maintenance

User Manual

ApplianceStor

Rev. 1, November 2011

The onboard hardware monitor automatically detects the voltage output through the onboard voltage
regulators. Select Ignore if you do not want to detect this item.

Boot menu

The Boot menu items allow you to change the system boot options.

Figure 125- Boot Menu

Setup Prompt Timeout [xc]

Use the <+> and <-> keys to adjust the number of seconds to wait for setup activation key.

Bootup NumLock State [On]

Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On]

Full Screen Logo [Enabled]

Allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled]
[Enabled]

Set this item to [Enabled] to use the RASILIENT SYSTEMS MyLogo2Tm feature.

Option ROM Messages [Force BIOS]

Allows you to set the display mode for Options ROM. Configuration options: [Force BIOS] [Keep
Current]

Summary of Contents for ApplianceStor 50





















































































































Search results

Summary of Contents for ApplianceStor 50

Reviews:

Related manuals for ApplianceStor 50

Brands by name

Popular brands

Rasilient ApplianceStor 50, User Manual

Search results

Summary of Contents for ApplianceStor 50

Reviews:

Related manuals for ApplianceStor 50

Brands by name

Popular brands