Raritan dominion kx III, Administrator'S Manual

Page: 48 / 392

Chapter 4: KX III Administrator Help
36
2. Connect one end of a DVI cable into the DVI-D port on the back of
the KX III.
3. Connect the other end of the DVI cable into the DVI port on the DVI
monitor.
Connect to a VGA Monitor (Optional)
To connect to a VGA monitor:
1. Connect a USB keyboard and mouse to the respective Local User
ports on the back of the KX III.
2. Plug the DVI-D to VGA converter in to the DVI-D port on the back of
the KX III, and secure it by turning the screws on each side
clockwise.
3. Connect a VGA cable to the DVI-D to VGA converter, connect the
other end to your VGA monitor and secure it by tightening the
screws.
Note: The DVI-D to VGA converter is not included with the KX III.
Contact Raritan Sales for information.
E. Connect Target Servers to the KX III
To connect a target server to the KX III:
1. Connect the keyboard, mouse and video plugs on the CIM to the
corresponding ports on the target server.
2. Connect the CIM to an available target server port on the back of the
KX III via a Cat5/5e/6 cable.
F. Tiering (Optional)
See Configuring and Enabling Tiering (on page 123,
http://www.raritan.com/help/kx-iii/v3.0.0/en/index.htm#33184 )
Step 4: Configuring the KX III
For the following steps, you must change the default password and
assign the KX III its IP address at the Local Console.
All other steps can be performed from either the Local Console, or from
the KX III Remote Console via a supported web browser using the KX
III's default IP address.
Java
®
1.7 (or higher) or Microsoft .NET
®
3.5 (or later) is required to use
KX III.