Raritan dominion kx III, Administrator'S Manual

Page: 299 / 392

Appendix B: Accessing a Paragon II from the KX III
287
Paragon II
operation
mode Mode description Supported?
port can be selected and
controlled by more than
one user, but only one
user has keyboard and
mouse control at any
one time. Timeout, which is configured
on the Paragon II, is not
supported. Both users will
have concurrent keyboard
and mouse control.
The Paragon II uses Green
to indicate ‘available’. This
will also be true if another
user is already accessing
the target.
Public View While one user is
accessing a server or
other device on a
specific channel port,
other users can select
that channel port and
view the video output
from that device.
However, only the first
user will have keyboard
and mouse control until
they disconnect or
switch away. Not supported.
This mode cannot be used
when connecting the CIM to
a Paragon II and the KX III.
The Paragon II uses Yellow
to indicate it is in P-View
mode.
CIM Name Updates

CIM names updated from Paragon II are stored and retrieved from
the CIM memory location corresponding to the Paragon naming
convention.

CIM names updated from the KX III are stored and retrieved from the
CIM memory location corresponding to the KX III naming convention.

CIM name updates do not propagate between the Paragon II and the
KX III.
Supported Connection Distances Between Paragon II and KX III
When using KX III as the front end of a Paragon II system, you should
restrict the cable length (distance) for good video quality.
Supported distance from the Paragon II user station to the target server
is 500 cable feet (152 m). Greater distances may result in video
performance that may or may not be acceptable to you.
Supported distance from KX III to the Paragon II user station is up to 150
cable feet (45 m).