Raritan dominion kx III, Administrator'S Manual

Page: 146 / 392

Chapter 4: KX III Administrator Help
134
Configuring Date/Time Settings
Use the Date/Time Settings page to specify the date and time for the KX
III. There are two ways to do this:

Manually set the date and time.

Synchronize the date and time with a Network Time Protocol (NTP)
server.
To set the date and time:
1. Choose Device Settings > Date/Time. The Date/Time Settings page
opens.
2. Choose your time zone from the Time Zone drop-down list.
3. Adjust for daylight savings time by checking the "Adjust for daylight
savings time" checkbox.
4. Choose the method to use to set the date and time:

User Specified Time - use this option to input the date and time
manually. For the User Specified Time option, enter the date and
time. For the time, use the hh:mm format (using a 24-hour clock).

Synchronize with NTP Server - use this option to synchronize the
date and time with the Network Time Protocol (NTP) Server.
5. For the Synchronize with NTP Server option:
a. Enter the IP address of the Primary Time server.
b. Enter the IP address of the Secondary Time server. Optional
6. Click OK.
Event Management
The KX III Event Management feature allows you enable and disable the
distribution of system events to SNMP Managers, the Syslog and the
audit log. These events are categorized, and for each event you can
determine whether you want the event sent to one or several
destinations.
Configuring Event Management - Settings
Configure SNMP traps and the syslog configuration from the Event
Management - Settings page. See
Configuring SNMP Traps (on page
135).
Once configured, enable the SNMP traps on the Event Management -
Destinations page. See
Configuring Event Management -
Destinations (on page 141).