09/01/2014
03C-01
S-7S LUBRICATION SYSTEM ASSEMBLY AND INSTALLATION
AFTER ENGINE IS INSTALLED
The engine needs to be installed to the airframe.
CAUTION: When working with the oil cooler, take care not to induce stress or
over tighten fittings or bolts. Damage to the cooler may result.
1.
With a band saw or hacksaw, remove the mount tabs from the oil cooler
leaving a 1/16" lip. See
FIGURE 03-10
.
2.
Cut the provided silicone sheets as per
FIGURE 03-10A
and install to the
upper and lower oil cooler mounts as shown in the parts drawing.
NOTE:
The piece for the top of the oil cooler needs two holes to allow for the
fittings.
Use the upper oil cooler mount as a template. Mark and cut. The
sheet provides vibration isolation and should extend past the forward and
rear edges of the oil cooler.
3.
Apply Loctite to bolts and assemble the upper and lower mounts to the
cooler using the threaded bushings.
NOTE: To achieve the proper
compression on the silicon rubber, it might be necessary to add washers
between the threaded bushings and the upper and lower oil cooler
mounts.
4.
Bolt the oil cooler mount to the left side of the gearbox as shown in the
parts drawing. Use Loctite to secure the bolt.
5.
Attach the bent oil cooler mount to the boss on the forward left hand
cylinder head. Refer to the parts drawing.
6.
Attach the oil cooler and mount assembly to the gearbox and engine. See
FIGURE 03-10.
7.
Refer to the parts manual for oil line routing.
IMPORTANT: The pickup
fitting is the straight fitting (OUT) on the oil bottle and MUST route to the
left hand fitting on the oil cooler. The return fitting is the angled fitting (IN)
on the oil bottle and MUST route to the fitting on the bottom of the engine.
CAUTION: Failure to route the oil lines properly will result in engine
failure.
Summary of Contents for S-7S COURIER
