Rans S-7S COURIER, Text Manual

Page: 13 / 203

09/01/2014
00-12
CLECOS: These are temporary fasteners that will be used to hold things together while
fitting and drilling. A pair of pliers is also required to install and remove the clecos. The
cleco's are color coded as to hole size.
Silver #40
Copper #30
Gold #11
To use, simply set cleco in the special pliers, squeeze closed, insert into the hole and
release. (Reverse for removal). You will find the clecos to be extremely useful throughout
assembly.
ROD ENDS
: When installing rod ends and similar hardware, be certain at least ten
threads are engaged, unless directed otherwise within the text.
CAUTION:
Rod Ends must be engaged a minimum of 10 complete turns.
RIVETS : Your kit is supplied with various sizes of aluminum and stainless steel pop
rivets. Even though we are careful, there is always the chance of the packages being
mis-labeled. So before riveting, be sure to double check that you have the correct
aluminum or stainless steel pop rivet for the particular section you are working on.
MARKERS:
Throughout the manual, you are instructed to mark on various parts. Use
flairs or any type of felt tip marker. Avoid using pencils. The graphite in the lead will
cause the aluminum to corrode.
ENGINE WARRANTY: Rotax engines have a six- month warranty from the time of first
use. There are however time constraints on this warranty. Please read the following
pages on warranty extensions very closely. If there are any questions on engine
warranty, please contact the factory.
AN & RIVET CHARTS: All bolts and rivets furnished with the kit are labeled as to their
size. In the event they become mixed or you question the size or length of a particular
bolt or rivet, we have included an AN bolt chart and a rivet chart.