Ranger Products RL-8500, Installation And Operation Manual

Page: 2 / 54

2
RECORD HERE THE FOLLOWING INFORMATION
WHICH IS LOCATED ON THE SERIAL NUMBER DATA PLATE
PURCHASE RECORD
Purchased Through ( Distributor ) ____________________________________________
Distributor Address _______________________________________________________
Distributor Phone _______________________
RANGER RL-8500 BRAKE LATHE
STANDARD FACTORY WARRANTY
TERMS
Ranger Products warrants each new RL-8500 Brake Lathe to be free from defects in material and workmanship
for a period of 12 months from the date of purchase to the original equipment owner under normal use and service.
The labor and service call charges to correct a factory manufacturing defect is covered by this warranty for a period of 90 days.
Brake Lathe accessory items are warranted to be free from defects in material and workmanship for a period of 90 days
including labor and service call charges.
THESE WARRANTIES DO NOT EXTEND TO…
defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation or lack of required maintenance.
This warranty is exclusive and in lieu of all other warranties expressed or implied. In no event shall Ranger Products be liable for
special, consequential or incidental damages for the breach or delay in performance of the warranty. Ranger Products
reserves the right to make design changes or add improvements to its product line without incurring any obligation to
make such changes on product sold previously. Warranty adjustments within the above stated policies are based on the
model and serial number of the equipment. This data must be furnished with all warranty claims.
DISCLAIMER OF CONSEQUENTIAL DAMAGES
Ranger Products shall not be liable for consequential damages arising out of or in connection with its products.
Consequential damages shall include, without limitation, loss of use, income, or profit, loss sustained as the result of injury
(including death) to any person, or loss of or damage to property (including property handled, processed or tested by our products).
NOTE: The equipment registration card must be completed and returned to the factory for warranty to be valid.
THE INFORMATION ABOVE MUST BE PROVIDED
FOR ALL SERVICE AND WARRANTY CLAIMS
RL-8500 COMBINATION BRAKE LATHE