RR27T
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
Page 16
80.) Install belt, be careful when unwrapping so you don’t lose the lacing
pin. Mate the ends of the belt together to make sure as many laces overlap
each other as possible, insert pin
81.) Slide top roller into place
82.) Pull belt into position
83.) Install lower side extensions, lower end mounts with an allan head bolt
x17mm nut, bolt on motor side is also used to secure chain for leg
Upper end is secured with 13mm Bolts, spacers and nuts, the travel cable is
also installed with theses bolts
Some conveyors (with square leg) will have two silver plates that are used
as spacers to hold the leg away from the belt when it is in the travel
position
