RR27T
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
Page 17
84.) Hook up hydraulic hoses, one from processor to conveyor, 1 from
conveyor to processor return tee
85.) While supporting conveyor pull out safety pins and slowly lower unit,
adjust leg until conveyor is at desired height, attach safety chain to catch
at bottom of leg
86.) Unfold conveyor so that it is full length, pull pin and engage locking
clasp between upper and lower conveyor, re-insert pin
87.) Engage conveyor lock between upper and lower conveyor sections
88.) Remove travel cable from operator side of conveyor, let it hang out of
the way on opposite side
