RR27T
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
Page 8
34.) Route hose through hole in cover to bar oil tank, remove nut, insert
hose over barb and snug up fitting (14mm)
35.) Remove nut from Bar Oil tank fitting, insert hose through nut and over
barb, snug up nut over hose
36.)
The chain can now be adjusted to ensure the tension is set
correctly. Proper chain tension is achieved when the chain can be
pulled away from the bar by hand ¼”--
‐
½”. To tighten or loosen the
chain, the two bolts can be loosened using a 12mm wrench. Next, the
allen key bolt can be turned clockwise to tighten or counter--
‐
clockwise
to loosen the chain. The two 12mm bolts can be tightened again to
hold the bar securely.
37.) Hook sawbar return spring into slot.
38.) Apply grease liberally to the metal surfaces that touch below the
spring, this will help them slide
