RR27T
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
Page 14
repeat on opposite side
71.) On some units the wedge adjustment lever needs to be installed by the
assembler
72.) Bolt the handle to the adjusting bar with the spring and nut in this
position, do not tighten
73.) Wedge adjustment bar swivel pin slides through tube behind the axle,
install spring clip
74.) With the handle engaged in the adjustment lock, snug up nut and bolt
so that the handle is engaged with the lock plate but it can still be pulled
out to change the wedge position
75.) Install splitter wedge