Instrument Functions
R&S
®
NGE100B
48
User Manual 5601.1343.02 ─ 02
3. Select "Trigger In" to accept external trigger signal or "Trigger Out" to output the
trigger signal.
4. Set the desired channel.
5. Select the desired trigger condition.
See
.
6. Set the desired "Logic" state.
7. Set the status to "Enabled".
The R&S NGE100B enabled the selected DIO interface and monitor or feedback
the trigger condition onto the selected channel.
5.6
Connecting to a Network
5.6.1
LAN Connection
R&S NGE-K101 (order number: 5601.2204.03) option is required to connect the R&S
NGE100B to a network via LAN connection.
There are two methods to establish a local area network (LAN) connection with the
R&S NGE100B for remote control operation.
5.6.1.1
Wired Connection
The network card can be operated with a 10 Mbps Ethernet IEEE 802.3 or a 100 Mbps
Ethernet IEEE 802.3u interface.
Risk of network failure
Before connecting the instrument to the network or configuring the network, consult
your network administrator. Errors may affect the entire network.
To establish a network connection, connect a commercial RJ-45 cable to the LAN port
of the instrument and to a PC.
Connecting to a Network
www.allice.de
Allice Messtechnik GmbH
