Remote Control
R&S
®
NGE100B
82
User Manual 5601.1343.02 ─ 02
Example:
OUTP:MODE? -> CV
Output mode has changed to constant voltage mdoe.
Usage:
Query only
OUTPut:SELect
<arg0>
This command activates or queries the instrument channel state of the previous
selected channedl.
If the selected channel is activated, the respective channel key (i.e.
Ch 1
,
Ch 2
,
Ch 3
)
on the front panel will be illuminated.
Parameters:
<arg0>
{OFF | ON | 0 | 1}
ON | 1
Selected channel will be activated.
OFF | 0
Selected channel will be deactivated.
*RST:
OFF | 0
Example:
INST OUT1
OUTP:SEL ON
Ch 1 is activated.
OUTP:SEL? -> 1
Return the state of the selected channel.
OTP:TRIPped?
Queries the overtemperature protection (OTP) tripped state of the previous selected
channel.
It is tripped if an OTP event occurs. Available from V1.50
Return values:
<arg0>
{OFF | ON | 0 | 1}
ON | 1
OTP event occurs.
OFF | 0
OTP event not occurs.
*RST:
OFF | 0
Example:
OUTP:TRIP? -> 1
OTP event occurs.
Usage:
Query only
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
