R&S NGE-K101, User Manual

Page: 49 / 105

Instrument Functions
R&S
®
NGE100B
47 User Manual 5601.1343.02 ─ 02
Trigger out parameters Trigger conditions Description
Output Off Output the selected logic level when the
Output is turned off at the selected channel.
Fuse Tripped Output the selected logic level when a fuse
tripped event occurs on the selected chan-
nel.
See Chapter 5.4.3, "Activating Fuse" ,
on page 37 and Chapter 5.5.2, "Fuse" ,
on page 42.
CC Mode Output the selected logic level when the
selected channel operates in the CC mode.
See
"CC mode" on page 35.
Voltage Level >= "set value" Output the selected logic level when the
voltage level of the selected channel is
greater or equal to the set level.
Current Level >= "set value" Output the selected logic level when the
current level of the selected channel is
greater or equal to the set level.
Critical Event OVP Output the selected logic level when the
selected critical event (OVP, OPP, OTP)
occurs on the selected channel. See
Chap-
ter 5.5.1, "Protection" , on page 40.
OPP
OTP
EasyArb Active Output the selected logic level when the
EasyArb function is running on channel 1.
See
Chapter 5.5.3, "EasyArb" , on page 43.
Note: For a reliable DIO trigger output, the
EasyArb waveform needs to be at least 200
ms.
Logic Active High Set the logic level of the trigger out signal.
Active Low
1. Select "Interface > Digital IO" menu item.
The R&S NGE100B displays the "Digital IO" dialog. See Figure 5-19 .
Figure 5-19: Digital IO dialog
2. Select the desired DIO interface.
Advanced Functions
www.allice.de Allice Messtechnik GmbH