Remote Control
R&S
®
NGE100B
75
User Manual 5601.1343.02 ─ 02
*IDN?
Identification
Returns the instrument identification.
Return values:
<ID>
"Rohde&Schwarz,<device type>,<part number>/serial num-
ber>,<firmware version>"
Example:
Rohde&Schwarz,NGE103B,5601.1414k03/100421,1.20
*OPC
Operation complete
Sets bit 0 in the event status register when all preceding commands have been execu-
ted. This bit can be used to initiate a service request. The query form writes a "1" into
the output buffer as soon as all preceding commands have been executed. This is
used for command synchronization.
*OPT?
Option identification query
Queries the options included in the instrument. For a list of all available options and
their description refer to the data sheet.
Usage:
Query only
*RST
Reset
Sets the instrument to a defined default status. The default settings are indicated in the
description of commands.
Usage:
Setting only
*STB?
Status byte query
Reads the contents of the status byte in decimal form.
Usage:
Query only
*WAI
Wait to continue
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH