Important Notes
R&S
®
NGE100B
10
User Manual 5601.1343.02 ─ 02
3
Important Notes
3.1
Symbols
Caution, general danger zone
Ground
PE terminal
ON (supply voltage)
OFF (supply voltage)
Ground terminal
3.2
Ambient Conditions
The allowed operating temperature ranges from +0 °C to +40 °C (pollution category 2).
The maximum relative humidity (without condensation) is at 80 %.
During storage and transport, the temperature must be between -20 °C and +70 °C. In
case of condensation during transportation or storage, the instrument will require
approximately two hours to dry and reach the appropriate temperature prior to opera-
tion. The instrument is designed for use in a clean and dry indoor environment. Do not
operate with high dust and humidity levels, if danger of explosion exists or with aggres-
sive chemical agents.
Any operating position may be used; however adequate air circulation must be main-
tained. For continuous operation, a horizontal or inclined position (integrated stand) is
preferable.
Specifications with tolerance data apply after a warm up period of at least 30 minutes
at a temperature of 23 °C (tolerance -3 °C/+ 7 °C). Specifications without tolerance
data are average values.
The heat produced inside the instrument is guided to the exterior via temperature-con-
trolled fan. Each channel has multiple temperature sensors which check the heat gen-
eration in the instrument and control the fan speed.
It is necessary to ensure that there is sufficient space around the instrument sides for
heat exchange. If the temperature inside the instrument increases to more than
Ambient Conditions
www.allice.de
Allice Messtechnik GmbH
