Rancilio EGRO 5511, Technical Manual

Page: 28 / 70

EGRO 5511 Manual
4.5 CONFIG 2 MENU
Language
The Config 2 menu allows for the adjusting of machine values in addition to Config 1. The submenus contained in this
menu are not drink specific. The adjustments made within the Config 2 menu will affect all drink products.
Specifies which language.
(OPTIONS: German, English, French, Japanese)
Decimal Point
NOT USED IN USA. Specifies the number of spaces after the decimal point in drink prices.
(OPTIONS: 0=No spaces; 1=Two spaces)
Periph.Type
NOT USED IN USA. Specifies what type of peripheral is connected.
(OPTIONS: 0=None; 1=Coins; 2=Card system; 4=Card system and coins; 6=CCI/CSI)
Card System
NOT USED IN USA. Identify which card type is being used. Only valid if Periph.Type=2.
Steam Boiler
Enables or disables the steam boiler.
(OPTIONS: 0=Disabled; 1=Enabled) (Recommended setting: 1(Enabled))
Power
DO NOT CHANGE! Specifies the power rating of the steam boiler.
(OPTIONS: 1=2kw boiler(10A fuse); 2=2.5kW boiler(13A fuse); 3=3kW boiler(16A fuse))
(Mandatory setting: 3)
Watertank
Enables or disables the portable water tank function. Enable this setting if the water supply to the
machine has no line pressure (such as from a portable tank).
(OPTIONS: 0=Disabled; 1=Enabled)
Power Version
Enables or disables the power version. When the power version is enabled, both boilers are
heated simultaneously. In order to change this setting, you will need to enter PIN code: 240874.
(OPTIONS: 0=1 Ph. with 16A; 1=1Ph. with 30A) (Recommended setting: 1(Enabled))
Save to Card?
Saves all settings in PRODUCTS, CONFIG 1, and CONFIG 2 to a service card. (Only valid with a
card reader correctly attached to the machine)
Load to Card?
Uploads the settings from a service card to the PRODUCTS, CONFIG 1, and CONFIG 2 menus of
the machine. (Only valid with a card reader correctly attached to the machine)
SUBMENU DESCRIPTION
Load Defaults
Overwrites the current settings in PRODUCTS, CONFIG 1, and CONFIG 2 with factory defaults.
WARNING: You will need to completely reprogram the machine.
PRODUCT TOTAL
PRODUCTS
CONFIG 1 CONFIG 2 SERVICE
PROGRAMMING MENU DIAGRAM
Page 27