RANA Systems Elite Controller, User Manual

Page: 40 / 328

ELITE SERIES USER MANUAL DOS ENHANCEMENTS
tions didn’t have to deal with any “strange”
hello program you may have had on the diskette.
You are now running under an enhanced DOS 3.3
system master. It already will recognize the
extra drives on an Elite Controller (if you are
using one). However, it is still treating all
your drives as Disk II’s (the minimum case).
The next step is to create an enhanced system
master which has the full storage of the drive
you are using as your system drive (slot six,
drive one). If all you have are Disk II drives,
you should continue following this procedure in
order to make a complete enhanced system master
(new utilities, etc.).
Remove the “configured master” and insert the
Enhancer diskette. Type:
BRUN PROFILE <RETURN>
PROFILE will respond with:
PROFILE V2.1 COPYR. (C)(P) 1982 RANA SYS.
FROM WHICH SLOT AND DRIVE
IS DOS IMAGE TO BE LOADED?
ENTER SLOT NUMBER (1-7)
Remove the Enhancer diskette and insert “con-
figured master”. Type (without <RETURN>):
6
P a g e 3 — 1 5