RANA Systems Elite Controller, User Manual, Page: 249 / 328

ELITE SERIES USER MANUAL ENHANCED CP/M UTIL.
The explanations for the “explained”s in the
tables are as follows:
(1) The target diskette will contain a
backup of the source diskette, however
the target diskette cannot be read by
any other drive but an Elite Three.
This means that the target diskette
cannot be moved to the source drive
and used just as If it were the source
diskette. See explanation (2) for
what can be done with the target disk-
ette.
(2) COPY will assume that the source disk-
ette was one which was created under
the condition described in explanation
(1) above. These two conditions per-
mit Elite Threes to be used in making
backup copies of non-Elite Three disk-
ettes, even though the copy cannot be
used just like the original. The
target diskette created under (1)
above is only good for later “unback-
ing—up” the information by reversing
the drive models used for the source
and target drives. An Elite Three
backup of a non—Elite Three diskette
is not valid for use under anything
except COPY, and then only given these
two explanation conditions.
What if your system consists of a Disk II drive
and an Elite Two? Does this mean you can’t
P a g e 1 0 — 1 8