manualshive.com logo in svg

RANA Systems Elite Controller, User Manual, Page: 13 / 328

Share
Download
RANA Systems Elite Controller User Manual Download Page 13

ELITE   SERIES  USER   MANUAL                       INTRODUCTION

Products less expensive to run in the                                               
comparisions which count: price per kilobyte of   
drive storage and expandability per controller        
card purchased.

We 

are 

proud off the Elite Series, and we know 

you will be too.

Ta achieve the best results and the most enjoy- 
ment from your new Elite Product, we suggest you 
read this manual carefully.

We have tried to avoid including too many tech-
nicalities hut,. if you feel we have gone beyond 
what you require, please hear with us. Like we   
said, we are proud of our products too!

Page 0-2

Summary of Contents for Elite Controller









































































































































































































































































































































Reviews:

No comments