RANA Systems Elite Controller, User Manual

Page: 218 / 328

ELITE SERIES USER MANUAL ENHANCED DOS UTIL.
TERMINATE THIS UTILITY.
After you allow CLONE to proceed (whole diskette
or DOS only), it will read as much information
from the source diskette as it can fit into
memory, and then write the information to the
destination diskette. If you specified a single
drive copy, then CLONE will first request:
PLEASE INSERT THE DESTINATION DISKETTE
AND PRESS <RETURN> TO CONTINUE.
This means that CLONE is waiting for you to
remove the source diskette and insert the
destination diskette. Once you’ve changed the
diskette, press (RETURN> and CLONE will continue
with the copy.
When CLONE has written out all the information
it has in memory, it will change back to reading
the source diskette to get more. If you’re
doing a single drive copy then CLONE will
request that you insert the source diskette just
like it did at the start of the copy process.
Two drive copies proceed all the way through
without your having to play with either
diskette.
Once CLONE has finished with the copy, it will
say:
DO ANOTHER COPY (Y/N)?
If you press <N>, CLONE will dump you back into
BASIC. If you press <Y>, CLONE will return to
P a g e 9 - 2 1