manualshive.com logo in svg

RAMMER S 83 STD, Operation And Maintenance Manual

The RAMMER S 83 STD is a robust and reliable construction tool designed for heavy-duty demolition tasks. To ensure optimal performance and longevity, it is imperative to follow the guidelines outlined in its comprehensive Operation and Maintenance Manual. This detailed manual can be easily downloaded for free from our website, providing users with essential instructions and tips to maximize the productivity of their RAMMER S 83 STD.

Share
Download
background image

© 2005 SANDVIK TAMROCK CORP.

Page 32 - LUBRICATION

Hammer tool greasing

S 83 STD

1. HAMMER TOOL GREASING

1.1 RECOMMENDED GREASES

■

RAMMER TOOL GREASE, part no. 902045

■

FUCHS Meisselpaste

■

KENDALL Tough TAC

■

KLÜBER Crafloscon C-SG 0 Ultra

■

LE 3751/3752 Almagard varipurpose lubricant

■

SHELL Kuggfett

■

SHELL Albida HLS 2

■

WYNNS GS80

1.2 MANUAL GREASING

Follow the product's greasing instructions and avoid excessive greasing. Dis-
pose of empty grease containers appropriately.

GREASING INTERVAL

1. Tool shank must be well lubricated before installing tool.

2. 5-10 strokes from grease gun to tool bushings and tool at regular intervals.

3. Adapt interval and amount of grease to wear rate of tool and working condi-

tions. This can be anything between two hours and daily, depending on material
(rock/concrete) to be broken. See “Recommended greases” on page 32.

Insufficient greasing or improper grease may cause:

■

Abnormal wear of tool bushing and tool

■

Tool breakage

Summary of Contents for S 83 STD



























































Reviews:

No comments

Related manuals for S 83 STD

ZOLL R Series In-Service Manual preview
R Series
Brand: ZOLL Pages: 5
Accu-Chek Compact Pocket User Manual preview
Compact
Brand: Accu-Chek Pages: 3
iBin Compact Installation Instructions preview
Compact
Brand: iBin Pages: 2
A.MENARINI GlucoMen Areo Quick Manual preview
GlucoMen Areo
Brand: A.MENARINI Pages: 2
Mainca RC-100 Manual preview
RC-100
Brand: Mainca Pages: 21
Daktronics HS-200 Owner'S Manual preview
HS-200
Brand: Daktronics Pages: 30
DAKOTA ULTRASONICS PR-82 Operation Manual preview
PR-82
Brand: DAKOTA ULTRASONICS Pages: 28
Quantum ELM Replacement Instructions Manual preview
ELM
Brand: Quantum Pages: 11
Quanser QNET User Manual preview
QNET
Brand: Quanser Pages: 21
Quanser 3 DOF Laboratory Manual preview
3 DOF
Brand: Quanser Pages: 18
Safavieh TBL4102 Quick Start Manual preview
TBL4102
Brand: Safavieh Pages: 2
Vendlet STANDARD Quick Manual preview
STANDARD
Brand: Vendlet Pages: 2
Y.I.C. TECHNOLOGIES EMScannerR Setup Manual preview
EMScannerR
Brand: Y.I.C. TECHNOLOGIES Pages: 6
Össur TOTAL KNEE 1900 Instructions For Use Manual preview
TOTAL KNEE 1900
Brand: Össur Pages: 58
JBM 54172 Instruction Manual preview
54172
Brand: JBM Pages: 13
Carbatec TH-B317P Owner'S Manual preview
TH-B317P
Brand: Carbatec Pages: 29
Moxa Technologies UC-8112-LX STK Hardware Quick Installation Manual preview
UC-8112-LX STK
Brand: Moxa Technologies Pages: 2
PurAthletics BALANCE DISC Instructions preview
BALANCE DISC
Brand: PurAthletics Pages: 2

Brands by name

Popular brands

Load more brands