© 2005 SANDVIK TAMROCK CORP.
Page 40 - MAINTENANCE
Routine maintenance
S 83 STD
1. ROUTINE MAINTENANCE
1.1 OVERVIEW
This product is a precision made hydraulic machine. Therefore great care and clean-
liness should be taken when handling any of the hydraulic components. Dirt is the
worst enemy in hydraulic systems.
Handle the parts carefully and remember to cover any cleaned and dried parts with
clean lint-free cloth. Do not use anything other than purpose designed materials for
cleaning hydraulic parts. Never use water, paint thinners or carbon tetrachloride.
Components, gaskets and seals in the hydraulic system should be oiled with clean
hydraulic oil before assembly.
1.2 INSPECTION AND MAINTENANCE BY THE OPERATOR
Note: The times given refer to the carrier hours while the attachment is installed.
EVERY TWO HOURS
■
Grease the tool shank and the tool bushings. See “Manual greasing” on page
32.
■
Observe hydraulic oil temperature, all lines and connections as well as impact
efficiency and evenness of operation.
■
Tighten loose connections.
EVERY 10 HOURS OR AT LEAST ONCE A WEEK
■
Remove the tool retaining pin and the tool and check their condition. Grind the
burrs away if necessary. See “Removal of tool” on page 43.
■
Check that the tool has received sufficient grease. Grease more frequently, if
necessary.
Summary of Contents for S 83 STD
