OPERATION - Page 29
© 2005 SANDVIK TAMROCK CORP.
Operation
S 83 STD
5.6 STORAGE
LONG TERM STORAGE
Observe the following points when the hammer is stored. In this way the vital parts
of the attachment are protected from rust and the machine is ready to be used when-
ever necessary.
1.
The storage area must be dry.
2. The tool must be removed in hydraulic hammers.
3.
The lower end of the piston, tool and tool bushings must be well protected with
grease in all hydraulic hammers.
4. Connections must be sealed with clean plugs to prevent oil leakage and dirt
from getting into couplings.
5. The product must be stored in the vertical position.
6.
Make sure the product can not fall.
Summary of Contents for S 83 STD
