manualshive.com logo in svg

RAMMER S 83 STD, Operation And Maintenance Manual

The RAMMER S 83 STD is a robust and reliable construction tool designed for heavy-duty demolition tasks. To ensure optimal performance and longevity, it is imperative to follow the guidelines outlined in its comprehensive Operation and Maintenance Manual. This detailed manual can be easily downloaded for free from our website, providing users with essential instructions and tips to maximize the productivity of their RAMMER S 83 STD.

Share
Download
background image

© 2005 SANDVIK TAMROCK CORP.

Page 34 - LUBRICATION

Carrier hydraulic oil

S 83 STD

2. CARRIER HYDRAULIC OIL

2.1 REQUIREMENTS FOR HYDRAULIC OIL

GENERAL REQUIREMENTS

In general the hydraulic oil originally intended for the carrier can be used with this
product. However, since working with the product heats the oil more than the usual
excavation work, the temperature of the oil must be monitored.

If the temperature of the hydraulic oil exceeds 80 °C (176 °F), an auxiliary oil cooler
is needed. The oil viscosity must be between 1000-20 cSt while the attachment is
being used.

When the product is used continuously, the temperature of the hydraulic oil normal-
izes at a certain level depending on conditions and on the carrier. The temperature
in the tank must not exceed the maximum allowed.

The hammer must not be started if the ambient temperature is below freezing and
the oil is very thick. The machine must be moved to bring the oil temperature above
0 °C (32 °F) before hammering can start (viscosity 1000 cSt or 131 °E).

Summary of Contents for S 83 STD



























































Reviews:

No comments

Related manuals for S 83 STD

Zetec TOPAZ Technical Manuallines preview
TOPAZ
Brand: Zetec Pages: 23
ACE INSTRUMENTS AFM-5 Quick Start Manual preview
AFM-5
Brand: ACE INSTRUMENTS Pages: 2
ODA LP Series User Manual preview
LP Series
Brand: ODA Pages: 103
Parker SC80 Operator'S Manual preview
SC80
Brand: Parker Pages: 39
Xycom 3400 Series Hardware Reference Manual preview
3400 Series
Brand: Xycom Pages: 99
Hagerman ECHO Manual preview
ECHO
Brand: Hagerman Pages: 4
hager EK087 Manual preview
EK087
Brand: hager Pages: 2
Ampro TECSHOW QUAD SPIDER 60 User Manual preview
TECSHOW QUAD SPIDER 60
Brand: Ampro Pages: 9
Rath 2100-VOIP2CS Installation & Operation Manual preview
2100-VOIP2CS
Brand: Rath Pages: 5
WE-EF LSP400 LED Series Installation And Maintenance Instructions Manual preview
LSP400 LED Series
Brand: WE-EF Pages: 6
Yamaha TG300 Sound List & Midi Data preview
TG300
Brand: Yamaha Pages: 39
Yamaha MU100 Supplementary Manual preview
MU100
Brand: Yamaha Pages: 110
Orliman STOMAMED COL-160 Manual preview
STOMAMED COL-160
Brand: Orliman Pages: 12
VanGaa Lighting VG-LB1083 User Manual preview
VG-LB1083
Brand: VanGaa Lighting Pages: 7
Garmin GPSMAP 7400 Series Installation Instructions Manual preview
GPSMAP 7400 Series
Brand: Garmin Pages: 8
Ultrasport 331100000096 Assembly Instruction Manual preview
331100000096
Brand: Ultrasport Pages: 72
Wieland SMI 1001 Operating Manual preview
SMI 1001
Brand: Wieland Pages: 2
SHOWTEC 41370 Micro Spot Manual preview
41370 Micro Spot
Brand: SHOWTEC Pages: 22

Brands by name

Popular brands

Load more brands