129
Regular and Mega Cab Trucks:
In the regular cab truck, the top tether
anchorages are located behind the center
and right passenger seats. In the mega cab
truck, the top tether anchorages are located
behind each rear seating position. There is a
plastic cover over each anchorage. To attach
the tether strap of the child restraint:
1. Place the child restraint on the seat and
adjust the tether strap so that it will
reach over the seat back, under the head
restraint and to the tether anchor directly
behind the seat.
Regular Cab Tether Anchorages
2. Route the tether strap to provide the
most direct path between the anchorage
and the child seat. The tether strap
should go between the head restraint
posts underneath the head restraint. You
may need to adjust the head restraint to
the upward position to pass the tether
strap underneath the head restraint and
between its posts.
3. Lift the cover (if so equipped), and attach
the hook to the square opening in the
sheet metal. Tighten the tether strap
according to the child seat manufac
-
turer’s instructions.
Crew Cab Trucks:
The top tether anchorages in this vehicle are
tether strap loops located between the rear
glass and the back of the rear seat. There is
a tether strap loop located behind each
seating position. Follow the steps below to
attach the tether strap of the child restraint.
1 — Tether Strap Hook
2 — Tether Strap To Child Restraint
3 — Tether Anchor
WARNING!
Never place a rear-facing child restraint in
front of an air bag. A deploying Passenger
Front Air Bag can cause death or serious
injury to a child 12 years or younger,
including a child in a rear-facing child
restraint.
2019_RAM_2500_3500_UG_USA=GUID-8BBFE451-BF24-4E82-808A-AE2460D39A05=1=en=.book Page 129
Summary of Contents for 2500 2019
Page 1: ...2019 USER GUIDE RAM 2500 3500...
Page 330: ......