STARTING AND OPERATING
170
Cargo Camera
Pressing the Cargo Camera soft key
will provide a full screen view of the
cargo area.
NOTE:
If the Cargo Camera view was selected
through the Surround View screen, exiting
out of the Cargo Camera screen will return to
the Surround View screen. If the Cargo
Camera was manually activated through the
Controls menu of the Uconnect display,
exiting out of the display screen will return to
the Controls menu.
Trailer Reverse Guidance
Pressing the Trailer Reverse Guid
-
ance soft key will provide a full
screen view of the cargo area and
trailer.
Pressing the Left & Right Tow
Mirror Split Screen View button
within the Trailer Reverse Guidance
screen will display a split screen to
allow the driver to see both sides of the
trailer at the same time. This view allows the
driver to pan left/right to better frame the
trailer in the image.
NOTE:
Trailer Reverse Guidance can only be
selected through the Surround View screen;
exiting out of the Trailer Reverse Guidance
screen will return to the Surround View
screen.
Zoom View
When the Rear View Camera image
is being displayed, and the vehicle
speed is below 8 mph (13 km/h)
while in any gear selector position,
Zoom View is available. By pressing the
“magnifying glass” icon in the upper left of
the display screen, the image will zoom in to
four times the standard view. Pressing the
icon a second time will return the view to the
standard Backup Camera display.
When Zoom View is selected while the
vehicle is in REVERSE, then shifted to
DRIVE, the camera delay view will display
the standard Backup Camera view. If the
vehicle is then returned to REVERSE gear
from DRIVE, the Zoom View selection will
automatically resume.
Shifting to NEUTRAL from any gear will
maintain the selected view (Zoom or Stan
-
dard) as long as the vehicle is below 8 mph
(13 km/h).
Zoom View is available until the gear selector
is placed in DRIVE or REVERSE and speeds
are at or above 8 mph (13 km/h).
NOTE:
If the vehicle is in DRIVE, NEUTRAL, or
REVERSE, and speed is greater than or
equal to 8 mph (13 km/h), Zoom View is
unavailable and the icon will appear gray.
While in Zoom View, the guidelines will
not be visible.
Deactivation
The system is deactivated in the following
conditions if it was activated
automatically:
When the vehicle is shifted out of
REVERSE (with camera delay turned on),
the camera image will continue to be
displayed for up to 10 seconds after
shifting out of REVERSE unless the
vehicle speed exceeds 8 mph (13 km/h),
the vehicle is shifted into PARK or the
ignition is placed in the OFF position.
There is a touch screen button “X” to
disable the display of the camera image.
When the vehicle is shifted out of
REVERSE (with camera delay turned off),
the surround view camera mode is exited
and the last known screen appears again.
2019_RAM_2500_3500_UG_USA=GUID-8BBFE451-BF24-4E82-808A-AE2460D39A05=1=en=.book Page 170
Summary of Contents for 2500 2019
Page 1: ...2019 USER GUIDE RAM 2500 3500...
Page 330: ......
