MULTIM
EDIA
304
Mobile Phone won’t pair to system:
Perform a hard reset in the mobile phone
by removing the battery (if removable —
see your mobile phone’s owner manual).
Delete pairing history in mobile phone and
Uconnect system; usually found in
phone’s Bluetooth connection settings.
Verify you are selecting “Uconnect” in the
discovered Bluetooth devices on your
mobile phone.
If your vehicle system generates a pin
code the default is 0000.
Mobile Phonebook didn’t download:
Check “Do not ask again,” then accept the
“phonebook download” request on your
mobile phone.
Up to 5,000 contact names with four
numbers per contact will transfer to the
Uconnect 4C/4C NAV system phonebook.
Can’t make a conference call:
CDMA (Code-Division Multiple Access)
carriers do not support conference calling.
Refer to your mobile phone user’s manual
for further information.
Making calls while connected to AUX:
Plugging in your mobile phone to AUX
while connected to Bluetooth will disable
Hands-Free Calling. Do not make calls
while your mobile phone is plugged into
the AUX jack.
VOICE RECOGNITION
QUICK TIPS
Introducing Uconnect
Start using Uconnect Voice Recognition with
these helpful quick tips. It provides the key
Voice Commands and tips you need to know
to control your Uconnect system.
If you see the NAV icon on the bottom bar, or
in the Apps menus, of your touchscreen, you
have the Uconnect 4C NAV With 8.4–inch
Display or the Uconnect 4C NAV With
12–inch Display system. If not, you have a
Uconnect 4C With 8.4–inch Display system.
Get Started
All you need to control your Uconnect system
with your voice are the buttons on your
steering wheel.
1. Visit
mobile device and feature compatibility
and to find phone pairing instructions.
2. Reduce background noise. Wind noise
and passenger conversations are exam
-
ples of noise that may impact recogni
-
tion.
3. Speak clearly at a normal pace and
volume while facing straight ahead. The
microphone is located in the headliner
and aimed at the driver.
4. Each time you give a Voice Command,
you must first push either the VR or
Phone button, wait until
after
the beep,
then say your Voice Command.
2019_RAM_2500_3500_UG_USA=GUID-8BBFE451-BF24-4E82-808A-AE2460D39A05=1=en=.book Page 304
Summary of Contents for 2500 2019
Page 1: ...2019 USER GUIDE RAM 2500 3500...
Page 330: ......