RAM 2500 2019, User Manual

Page: 33 / 332

31
Automatic High Beam Headlamp Control
— If Equipped
The Automatic High Beam Headlamp Control
system provides increased forward lighting at
night by automating high beam control
through the use of a digital camera mounted
on the inside rearview mirror. This camera
detects vehicle specific light and automati
-
cally switches from high beams to low beams
until the approaching vehicle is out of view.
NOTE:

The Automatic High Beam Headlamp
Control can be turned on or off by
selecting “ON” under “Auto Dim High
Beams” within your Uconnect settings, as
well as turning the headlight switch to the
AUTO position. Refer to “Uconnect
Settings” in “Multimedia” in the Owner’s
Manual for further information.

Broken, muddy, or obstructed headlights
and taillights of vehicles in the field of
view will cause headlights to remain on
longer (closer to the vehicle). Also, dirt,
film, and other obstructions on the wind
-
shield or camera lens will cause the
system to function improperly.
If the windshield or Automatic High Beam
Headlamp Control mirror is replaced, the
mirror must be re-aimed to ensure proper
performance. See a local authorized dealer.
To Activate
1. The Automatic High Beams are enabled
through the Uconnect system. Refer to
“Uconnect Settings” in “Multimedia” in
the Owner’s Manual for further informa
-
tion.
2. Turn the headlight switch to the AUTO
headlight position.
3. Push the multifunction lever away from
you (toward front of vehicle) to engage
the high beam mode.
NOTE:
The Automatic High Beams will not activate
until the vehicle is at or above 12 mph
(20 km/h).
To Deactivate
1. Pull the multifunction lever toward you
(or rearward in vehicle) to manually deac -
tivate the system (normal operation of
low beams).
2. Push back on the multifunction lever to
reactivate the system.
The Automatic High Beams can also be
deactivated through the Uconnect system.
Refer to “Uconnect Settings” in “Multi
-
media” in the Owner’s Manual for further
information.
Flash-To-Pass
You can signal another vehicle with your
headlights by lightly pulling the multifunc
-
tion lever toward you. This will cause the
high beam headlights to turn on, and remain
on, until the lever is released.
Automatic Headlights
This system automatically turns your head -
lights on or off based on ambient light levels.
To turn the system on, turn the headlight
switch to the extreme clockwise position
aligning the indicator with the AUTO on the
headlight switch. When the system is on, the
Headlight Time Delay feature is also on. This
means your headlights will stay on for up to
90 seconds after you turn the ignition switch
OFF. To turn the Automatic System off, turn
the headlight switch counterclockwise to the
O (off) position.
2019_RAM_2500_3500_UG_USA=GUID-8BBFE451-BF24-4E82-808A-AE2460D39A05=1=en=.book Page 31