Raisecom RC3000-15 Page 94 Hardware Description Download

Page: 94 / 273

Raisecom
RC3000-15 (P100R001) Hardware Description

8 Voice cards

Raisecom Proprietary and Confidential

8.1 32FXS/32FXO

8.1.1 Functions and appearance

Panel

Function

The 32FXS/32FXO card is a 32-way voice access card.
It provides the following functions:



Provide 32 ways of voice services. There are three
voice modules: 32FXS, 32FXO, and 16FXS16FXO.



Support signaling occupation bits: a-bit and b-bit. By
default, it is a-bit.



Support configuring voice gain through software:

–

The A/D gain ranges from -10 to 16 dB, and is 0 dB
by default.

–

The D/A gain ranges from -13 to 10 dB, and is -3.5
dB by default.

–

The step is 0.1 dB.



Support configuring the signaling mode to
RAISECOM, user-defined mode, or other modes. By
default, it is RAISECOM.



Support querying signaling status.



Support reverse polarity switching.



Support CID.



Support lightning protection and overcurrent
protection.



The 32FXS card is of high power when multiple
ways of services are in off-hook status, so hot
swapping is prohibited.



To avoid abnormalities such as false ringing,
remove the cable of each voice interface before
hot swapping of the 32FXS or 32FXO card.

Summary of Contents for RC3000-15


















































































































































































































































































Search results

Summary of Contents for RC3000-15

Reviews:

Related manuals for RC3000-15

Brands by name

Popular brands

Raisecom RC3000-15, Hardware Description

Search results

Summary of Contents for RC3000-15

Reviews:

Related manuals for RC3000-15

Brands by name

Popular brands