Raisecom iTN8600-I Product Description Download

Page: 64 / 71

Raisecom
iTN8600-I (A) Product Description

5 Appendix

Raisecom Proprietary and Confidential

5.3 Compliant standards and protocols

Standard and

protocol

Description

IEEE 802.1p

Traffic Class Expediting and Dynamic Multicast Filtering

IEEE 802.3

Carrier sense multiple access with collision detection(CSMA/CD)
access method and physical lay specification

IETF RFC2012

SNMPv2 Management Information Base for the Transmission
Control using SMIv2. K. McCloghrie, Ed.. November 1996

IETF RFC2013

SNMPv2 Management Information Base for the User Datagram
Protocol using SMIv2. K. McCloghrie, Ed.. November 1996

IETF RFC2233

The Interfaces Group MIB using SMIv2. K. McCloghrie, F.
Kastenholz. November 1997

IETF RFC2574

User-based Security Model (USM) for version 3 of the Simple
Network Management Protocol (SNMPv3). U. Blumenthal, B.
Wijnen. April 1999

IETF RFC2819

Remote Network Monitoring Management Information Base. S.
Waldbusser. May 2000

IETF RFC3273

Remote Network Monitoring Management Information Base for
High Capacity Networks. S. Waldbusser. July 2002

IETF RFC3418

Management Information Base (MIB) for the Simple Network
Management Protocol (SNMP). R. Presuhn, Ed. December 2002

ITU-T G.695

Optical interfaces for coarse wavelength division multiplexing
applications

ITU-T G.698.2

Amplified multichannel DWDM applications with single channel
optical interfaces

ITU-T G.709

Interfaces for the Optical Transport Network

ITU-T G.813

Timing characteristics of SDH equipment slave clocks (SEC)

ITU-T G.825

The control of jitter and wander within digital networks which are
based on the synchronous digital hierarchy (SDH)

ITU-T G.8251

The control of jitter and wander within the optical transport
network (OTN)

ITU-T G.841

Types and characteristics of SDH network protection architectures

ITU-T G.873.1

Optical Transport Network (OTN): Linear protection

ITU-T G.873.2

ODUk shared ring protection

ITU-T G.959.1

Optical transport network physical layer interfaces

Summary of Contents for iTN8600-I








































































Search results

Summary of Contents for iTN8600-I

Reviews:

Related manuals for iTN8600-I

Brands by name

Popular brands

Raisecom iTN8600-I, Product Description

Search results

Summary of Contents for iTN8600-I

Reviews:

Related manuals for iTN8600-I

Brands by name

Popular brands