Raisecom
iTN8600-I (A) Product Description
3 Cards and parts
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
17
Function
Description
accesses OTU4 services, it supports OCh 1+1 protection. When it
accesses other services, it supports interface protection. By default,
no protection is configured.
The protection switching time is smaller than 50ms.
The protection switching condition can be based on LOS, LOF,
AIS, and BER.
Loopback
Support interface loopback at the line side or client side.
Support ODU0/1/2/2e/3/4/flex timeslot loopback.
Support internal loopback and external loopback.
Optical module
management
Support DDM.
Support LOS alarms, in-position monitoring, shutting down laser,
and ALS.
Support configuring relevant optical modules.
Support hot swapping.
Upgrade
Support upgrading system software online.
3.1.4 Interfaces
Table 3-3 lists interfaces on the iTN8600-I.
Table 3-3
Interfaces on the iTN8600-I
Type
Description
CONSOLE
USB
Debugging serial interface, connected to the
management PC, with the baud rate of 9600
After logging in to the device through the Console
interface, you can debug the device.
SNMP/EXT
RJ45
2 network management interfaces, all supporting
out-of-band DCN SNMP or Telnet network
management
One interface is used for SNMP out-of-band
network management while the other is used for
cascading network management systems.
C1–C16
SFP+
Client-side SFP+ interface
Support SFP+ optical modules, such as Raisecom
USFP+, RSP (CWDM SFP+), and DSFP+ optical
modules.
C17–C18
QSFP+
QSFP28
Client-side SFP+ interface, compatible with
QSFP+ and QSFP28
Support QSFP+ optical modules, such as
Raisecom UQSP optical modules. The C17
interface supports being fanned out into 4 SFP+
interfaces through the QSFP+ PSM4 optical
module.
Support QSFP28 optical modules, such as
Raisecom UQP optical modules.
L1–L2
CFP2
Line-side CFP2 interface
Support CFP2 optical modules, such as Raisecom
UC2 optical modules.
