© Raimondi S.p.A.
Page 9/36-2
Use and Maintenance Manual
CHAPTER 2
Safety Rules
raimondispa.com
Via dei Tipografi 11, 41122 Modena (MO) - Italy
Tel.: +(39) 059 280888 - Fax: +(39) 059 282808
1
4
2
3
2.5 Description of machine groups
The BOLT series are made up of a series of groups. These interact to ensure functions are always effective. The groups are:
1 Motor group
On which the cutting blade is positioned. Equipped with an ergonomic handle
for an easier use for the operator and connection to the power supply.
2 Cooling group
It allows for the constant supply of cooling water for cutting, equipped with
submersible pump, water collection tank.
3 Frame
It is the load-bearing part of the machine, equipped with telescopic feet to ease
transport on motor vehicle. It is equipped with aluminum benches where the
material to be cut can be leaned on.
4 Square group
It is made up of a series of millimeter instruments that determine the
perpendicularity and uniformity of cuts to be made on the materials.
