© Raimondi S.p.A.
CHAPTER 3
Handling, Installation, Adjustments
raimondispa.com
Via dei Tipografi 11, 41122 Modena (MO) - Italy
Tel.: +(39) 059 280888 - Fax: +(39) 059 282808
Page 17/36-3
Use and Maintenance Manual
3.4 Assembly of the machine
Remove the machine from the pallet and make sure there are no broken or damaged parts.
Free the rear leg by completely unscrewing the leg fixing knobs (
A
). Free the rear leg by completely unscrewing the leg fixing knobs (
A
). Place
oneself at the rear side of the machine and lift the machine until its leg fully comes out of the frame. Fully screw the leg fixing knobs again (
A
).
Place oneself at the front side of the machine and fully unscrew the leg fixing knobs (
B
) and lift the machine until all legs are fully opened.
Fully tighten leg fixing knobs again (
B
).
After closing the drain hole with the specific plug, pour cold and clean water into the tank
until a level 2 cm (25/32”) above the recycle pump has been reached.
3.4.1 Tank filling
Water level
Tank
Recycle
pump
Min. 2 cm
Min. 25/32”
TO CARRY OUT THIS OPERATION, WEAR THE PROTECTIvE gLOvES AND ACCIDENT-PREvENTION SHOES.
MAKE SURE THE MOTOR gROUP HAS BEEN FIXED CORRECTLY.
B
B
A
A
TO CARRY OUT THIS OPERATION, MAKE SURE THE MACHINE IS NOT CONNECTED TO THE MAINS.
