© Raimondi S.p.A.
Page 7/36-2
Use and Maintenance Manual
CHAPTER 2
Safety Rules
raimondispa.com
Via dei Tipografi 11, 41122 Modena (MO) - Italy
Tel.: +(39) 059 280888 - Fax: +(39) 059 282808
2.2 Definition of safety-related terms
In this manual, the following terms will be employed as to safety:
Dangerous area
each area within and/or close to the machine, where the presence of an exposed person constitutes a
risk for the safety and health of this person.
Exposed person
anybody standing, either partially or totally, in a dangerous area.
Operator
person in charge of the installation, operation, adjustment, maintenance, cleaning, repair, transport of
parts of the machine and all the other activities required for its operation.
Safety component
component specifically designed by the manufacturer and sold separately from the machine, aimed
at ensuring safety. Consequently, the device whose failed operation jeopardizes the safety of exposed
persons will be considered as a safety component.
2.3 Correct use of the machine
The machine was designed and manufactured to cut and bevel (45° jolly) single- and double-fired ceramic tiles, porcelain gres, marble, natural
stone, Tuscan terracotta tiles, cement agglomerates.
THE MACHINE CANNOT BE USED FOR OTHER TYPES OF PRODUCTS WITHOUT PREvIOUS AUTHORIZATION BY
RAIMONDI S.P.A., WHICH WILL NOT BE HELD RESPONSIBLE FOR DIRECT OR INDIRECT DAMAgE DERIvINg FROM
AN IMPROPER USE OF THE MACHINE.
Use
The machine is semi-automatic, the blade advancement is determined by the human strength and so its advancement speed will have to be
commensurate with the hardness and thickness of the material to be cut.
Cutting of materials shall be made with sharp blades and water , which shall always be present in the tank, in the required quantity.
THE MACHINE CANNOT BE USED FOR DRY CUTTINg AND WITH INEFFECTIvE BLADES
.
2.4 Characteristics of the machine
Type of blades to be used
A series of cutting blades, suitable for the BOLT machine, will ensure optimization of the activity, as well as good results.
Blade characteristics:
External diameter
250 mm / 10”
Hole diameter
25,4 mm / 1”
Direction of rotation
CLOCKWISE
Rotation speed
rpm
-1
2800 ÷ 3360
