Page 1: ...table surface should be approximately 020 0 5 mm above the fixed table surface This is adjusted as fo lows Slightly loosen the two No 2 machine screws Adjust set screws No 4 until the correct height is achieved Be sure table is leve1 Finally retighten No 2 screws Tischplatte fixed tabl bz AMI LTD 2 MGCUTLOUGH DRIVE SOUTHCATE INDUSTRIAL PARK NEW CASTLE DE19720 PHONE 3021 322 2226 ...
Page 2: ...23tr 2n MK 4 Sliding Table Parts Numbers 2 AB m2v L 21t 02 u d t H zo3 w ti i 211 l 206 4 ...
Page 3: ...op block Cutoff stop Micro adjustment block Cutoff stop hold dovun block Scale End cap Crosscut fence Ball bearing 68822 Mainframe shoulder bolt M 6x12 mm Adjustable lever M 5xl mm Adjustable lever M 6x40 mm Locking nut Flat washer 8x1613 mm Thumbscrew 6132 mm Thumbscrew 5x30 mm Countersunk screw M 5x8 mm Gountersunk screw M 6x16 mm Allen screw M 5120 mm Washer M 6 Washer M 5 Threaded pin M SlG m ...
