RAIMONDI BOLT Use And Maintenance Manual Download Page 2

Page: 2 / 36

MANUALE D’USO E MANUTENZIONE

PAG.X DI XX

mod. BOLT - ED. 03/2015 - S. 01

Page 2/36-0

CHAPTER 0

Index

raimondispa.com

Via dei Tipografi 11, 41122 Modena (MO) - Italy

Tel.: +(39) 059 280888 - Fax: +(39) 059 282808

TABLE OF CONTENTS

CHAPTER 1 INTRODUCTION

1.1 TESTING, WARRANTY AND RESPONSIBILITY _________________________________________________________ 4/36-1

1.2 ENVIRONMENTAL CONDITIONS ________________________________________________________________ 4/36-1

1.3

INTERVENTION REQUEST AND TECHNICAL SERVICE _____________________________________________________ 5/36-1

1.4

SPARE PARTS ORDERS _____________________________________________________________________ 5/36-1

1.5 MARKING ____________________________________________________________________________ 5/36-1

CHAPTER 2 SAFETY RULES

2.1

SAFETY GENERAL RULES ____________________________________________________________________ 6/36-2

2.2 DEFINITION OF SAFETY-RELATED TERMS ___________________________________________________________ 7/36-2

2.3 CORRECT USE OF THE MACHINE________________________________________________________________ 7/36-2

2.4 CHARACTERISTICS OF THE MACHINE _____________________________________________________________ 7/36-2

2.5 DESCRIPTION OF MACHINE GROUPS _____________________________________________________________ 9/36-2

2.6 POSITION OF THE OPERATOR ________________________________________________________________ 10/36-2

2.7

SAFETY DEVICES _______________________________________________________________________ 10/36-2

2.8 ACCESSORIES OF THE MACHINE_______________________________________________________________ 10/36-2

2.9 NOISE _____________________________________________________________________________ 11/36-2

2.10 VIBRATIONS __________________________________________________________________________ 12/36-2

2.11 DEMOLITION AND DISPOSAL _________________________________________________________________ 13/36-2

2.12 CE MANUFACTURER’S DECLARATION ROHS/RAEE _____________________________________________________ 14/36-2

CHAPTER 3 HANDLING, INSTALLATION, ADJUSTMENTS

3.1

PACKING TRANSPORT ____________________________________________________________________ 15/36-3

3.2 MANUAL HANDLING ______________________________________________________________________ 15/36-3

3.3 OWER SUPPLY ________________________________________________________________________ 16/36-3

3.4

ASSEMBLY OF THE MACHINE ________________________________________________________________ 17/36-3

3.4.1 TANK FILLING _________________________________________________________________________ 17/36-3

CHAPTER 4 USE OF THE COMMANDS

4.1 CUTTING ____________________________________________________________________________ 18/36-4

4.2 DIAGONAL CUTS ________________________________________________________________________ 19/36-4

4.3 45° JOLLY CUTS _______________________________________________________________________ 20/36-4

4.4

DIAMOND BLADE SHARPENING _______________________________________________________________ 22/36-4

4.5

SQUARE ADJUSTMENT ____________________________________________________________________ 22/36-4

4.5.1 SUPPORT ALIGNMENT ____________________________________________________________________ 23/36-4

CHAPTER 5 MAINTENANCE INTERVENTIONS

5.1

BLADE REPLACEMENT _____________________________________________________________________ 25/36-5

5.2 TANK EMPTYING AND CLEANING _______________________________________________________________ 26/36-5

CHAPTER 6 ACCESSORIES

6.1 ACCESSORIES _________________________________________________________________________ 27/36-6

6.1.1 SET-SQUARE __________________________________________________________________________ 27/36-6

6.1.2 WHEEL KIT ___________________________________________________________________________ 27/36-6

CHAPTER 7 DIAGNOSTICS

7.1

TROUBLE-SHOOTING _____________________________________________________________________ 28/36-7

CHAPTER 8 SPARE PARTS AND ELECTRIC DIAGRAM

8.1 SPARE PARTS _________________________________________________________________________ 30/36-8

8.2 ELECTRIC DIAGRAMS _____________________________________________________________________ 32/36-8

Summary of Contents for BOLT





































Search results

Summary of Contents for BOLT

Reviews:

Related manuals for BOLT

Brands by name

Popular brands

RAIMONDI BOLT, Use And Maintenance Manual

Search results

Summary of Contents for BOLT

Reviews:

Related manuals for BOLT

Brands by name

Popular brands