© Raimondi S.p.A.
MANUALE D’USO E MANUTENZIONE
PAG.X DI XX
mod. BOLT - ED. 03/2015 - S. 01
Page 22/36-4
CHAPTER 4
Use of the Commands
raimondispa.com
Via dei Tipografi 11, 41122 Modena (MO) - Italy
Tel.: +(39) 059 280888 - Fax: +(39) 059 282808
4.4 Diamond blade sharpening
When you notice that during cutting the blade “sparks”, that at the end of cutting it “breaks”
the tile and that advancement requires too much of an effort, the blade shall be dressed making
repeated cuts on the dressing stone supplied with the machine.
4.5 Square adjustment
FOR THIS OPERATION, MAKE SURE THE MACHINE IS NOT CONNECTED TO THE MAINS.
MAKE SURE THE SQUARE (A) IS CLEAN AND IN CONTACT
WITH THE STOP (B) AND THAT THE LEvER (C) IS BLOCKED.
Bring the motor group to end of cutting position, lean the check square (
E
) against the swiveling square (
A
).
Position the check square until it grazes the blade (
F
), have the motor group slide and verify whether the blade follows the square (
E
).
A
B
C
C
A
F
E
E
F
