PROGRAMMING OF VRAE
4 - 34
4.7.6 Change Password
The user can modify the password from the monitor.
1. The seventh sub-menu item in Table 4.6 is “Change
Password?”
2. Press the
[Y/+]
key and the display shows the current
password: “Enter new password = xxxx” with the left
most digit flashing.
3. Press the
[Y/+]
or
[N/-]
key to cycle through all 10
numerals. Press
[MODE]
momentarily to advance to the
next digit. The flashing digit will move to the next digit
to the right. Repeat this process until all 4 digits of the
new password are entered.
4. Press and hold the
[MODE]
key for 1 second to exit the
data entry mode and move to the next monitor setup sub-
menu.
5. If there is any change to the existing password, the
display shows “Save ?” Press the
[Y/+]
key to accept the
new password. Press the
[N/-]
key to discard the changes
and move to the next sub-menu.
6. The monitor next asks for this value to be confirmed.
“Confirm New Password = 0000” with the left most digit
flashing. The number must be re-entered as before to
exit the monitor setup sub-menu. If a different entry is
entered in the second time, the password reverts to its
original setting.
