PROGRAMMING OF VRAE
4 - 23
4.6.2 Clear All Data
This function will erase all data stored in the non-volatile
data memory. This does not change STEL, TWA, Peak,
minimum concentration and run time values which are stored
in the regular data memory.
1. “Clear All Data?” is the second sub-menu item in Table
4.5.
2. Press the
[Y/+]
key to clear the data memory. Display
shows “Are You Sure?” to re-confirm the clearing of
memory.
3. Press the
[Y/+]
key again will erase all the data memory.
4. Press the
[N/-]
or
[MODE]
key to exit without clearing
the data memory and move to next datalog sub-menu.