PROGRAMMING OF VRAE
4 - 30
4.7.2 Change Alarm Mode
There are two different alarm modes:
Latched
and
Automatic Reset
in VRAE that can be selected from the
programming menu.
1. “Change Alarm Mode?” is the third sub-menu item in
Table 4.6.
2. Press the
[Y/+]
key, the display shows the current alarm
mode selection: “Alarm Mode = Latched?”
3. Press the
[Y/+]
key to accept the currently displayed
alarm mode. Press
[N/-]
key to change to the other alarm
mode: “Alarm Mode = Auto reset?” Press
[MODE]
key
to exit this sub-menu and move to the next monitor setup
sub-menu.
4. If there is any change to the existing selection, pressing
the
[Y/+]
key the display will show “Save ?” Then, press
the
[Y/+]
key to accept or the
[N/-]
key to discard the
change and move to the next sub-menu.
